Fix an Air Conditioner When It Gives You an E1 Code
The E1 code is an error code that appears on the LED temperature display of some digital air conditioners.
The error code could mean anything from dirty air filters to a damaged room thermistor, a device connected to your thermostat that detects room temperature.
Troubleshooting the cause of this error code may improve your air conditioner's performance.
Before sending your unit in for repairs, inspect it quickly and safely.
How to Fix Air Conditioner When It Gives You E1 Code
Press Power
Press Power, button to turn off your unit and then remove the filter from the filter panel on the side or front of your air conditioner. Refer to your manual if you are unsure where the filter on your unit is located.
Inspect filter
Inspect the filter. If it is dirty, brush off dirt, debris and lint. If it is really dirty, wash it with mild soap and water and allow it to dry completely. Reinsert it into its compartment. If your filter is worn out or damaged, purchase a replacement filter from an appliance or hardware store and replace the old one.Turn on the air conditioner. Move to the next step if the LCD continues to display the E1 error code.
Check for a reset button on your air conditioner and press it to reset your unit
Check for a reset button on your air conditioner and press it to reset your unit.
Some of the newer air conditioners have reset buttons to restore the default factory settings.
Press Power, button on the front panel of your air conditioner to power down your unit if it does not have a reset button.
Unplug the unit from the electrical outlet.
Leave the air conditioner off for several hours to see if it will reset.
Plug your air conditioner back into the electrical outlet and turn it on.
If your air conditioner is still displaying the E1 error code, turn it off and contact a qualified technician because the room thermistor responsible for detecting room temperature may be defective.
Plug your air conditioner back into the electrical outlet and turn it on.
If your air conditioner is still displaying the E1 error code, turn it off and contact a qualified technician because the room thermistor responsible for detecting room temperature may be defective.